This machine is a plastic extrusion equipment which is specialized in the production of unburned board. It has the advantages of high pressure and high product density. In normal operation, it must be matched with vacuum pump, which can effectively remove the mixed gas in the slurry and maximize the plasticity of the slurry, so as to obtain compact structure, good mechanical strength, isotropic, no internal stress and smooth surface green body.
Host parameters
Main functions: extrusion molding of products
Moisture content of mud: 10-12%
Production capacity: ≤ 8m / min
Rotation speed of upper mixing shaft: 26.4rpm,
Diameter of upper screw: φ 450mm
Speed of lower mud squeezing shaft: 20 rpm, can be adjusted
● diameter of lower mud extruding screw: 2 × φ 400mm
Squeezing pressure: ≥ 5MPa
Upper motor power: 45KW
Lower motor power: 160kW
Air pressure: 0.5MPa
Vacuum degree: ≥ - 0.094 MPa
Dimension: 5350 × 1677 × 2060mm
Net weight: about 15000kg
Auxiliary parameters
Moisture content of mud: 10-12%
Rotation speed of mixing shaft: 22.8rpm
Rotation speed of mud squeezing shaft: 19.6rpm
Diameter of mud extruding screw: Φ 280mm
Working pressure of pneumatic clutch: 0.5-0.8mpa
Vacuum degree: ≥ - 0.094 MPa
Motor power: 59 kw
Dimension: 4500 × 1730 × 1600mm
Net weight: 6000kg